Purolator Pleated Air Filters
The Purolator Pleated Air Filter Series is a multi-faceted range of air filtration products that can provide for every possible air filtration need. There is the durable, moisture resistant 100% synthetic Puro-g13een® pleated air filter that qualifies for LEED certification points. The standard and high capacity versions of our Key Pleat. Using breakthrough R&D to provide a lower pressure drop and higher dust holding, the high capacity Defiant® Mark80-D® and standard capacity Hi-E® 40 filters are built and provide better than ever filtration. Purolator’s Hi-E 40 I is a medium efficiency pleated filter specially constructed for use in systems requiring fire retardant products. Meanwhile the Purolator’s Hi-E® 40 H High Temperature filter is a medium efficiency pleated filter specially constructed for use in systems involving elevated operating temperatures. Purolator’s Mono Pleat combines high performance filtration with a unique Monobound frame construction that results in an economical, high capacity, medium efficiency air filter. Industrial applications for the PAF 11 include Pre-filtration for hospitals, general health care facilities, food processing plants, telecommunications, pharmaceutical and semi-conductor manufacturing. Replacement filters and replacement cartridges that include models P25: Honeywell F25 Replacement Cartridge, PS5 / Purolator 2000 and P1200
Additional Information

PUROLATOR PURO-G13EEN® PLEATED FILTER
• MERV 13
• Moisture resistant beverage board frame
• Damage resistant
• May qualify as a sustainable component for LEED/Green Building Initiative
• 1”, 2” and 4” depths available

PUROLATOR KEY PLEAT
• MERV 8 standard and high capacity
• 100% synthetic media
• Self-supported
• Damage resistant
• No metal
• Fully incinerable

PUROLATOR DEFIANT MARK 80-D
• Available in 1″, 2″ or 4″ depths and several standard face sizes
• 100% thermally bonded synthetic media
• Mechanical MERV 8
• 95% average arrestance
• Effective as a stand-alone filter or pre-filter

PUROLATOR HI-E 40 PLEAT AIR FILTER
• Available in 1″, 2″, 4″ or 6” depths and several standard face sizes
• 100% thermally bonded synthetic media
• Mechanical MERV 8
• 95% average arrestance
• Effective as a stand-alone filter or pre-filter

PUROLATOR HI-E 40I PLEATED AIR FILTER
• Perimeter frame is constructed of UL approved non-flammable board
• Media is bonded upstream and downstream to diagonal support elements
• 1/8″ thick media
• Media is high density
• Ultra-fine fiberglass media reinforced by a woven fiberglass mesh
• MERV 8
• 90-93% average arrestance

PUROLATOR MONO PLEAT AIR FILTER
• One-piece wrap around chipboard frame
• Filter element is mechanically bonded to the frame by a thermal plastic sealant activated by applied heat and pressure
• Economical, high capacity medium efficiency filter
• Designed for applications where 1″ disposables are effective

PUROLATOR HI 40 H PLEATED AIR FILTER
• MERV 8
• Specially constructed for use in systems involving elevated operating temperatures
• Perimeter frame is constructed of 24 gauge aluminized steel
• Pleated element is supported downstream by a 24 gauge expanded aluminized steel face guard
• Filter media is ¼” thick, high-density ultra-fine fiberglass reinforced by a woven fiberglass mesh
• Constructed to operate at 400 degrees F continuously and may be subjected to temperatures up to 450 degrees F for short durations of not more than 10 minutes

PUROLATOR PAF 11 PLEATED AIR FILTER
• MERV 11
• Self-supported
• Extended surface
• Manufactured for system applications requiring high efficiency, non-shedding filtration media
• Effective in single filter applications or as improved pre-filter substitutes for disposables, permanent metal filters or media pad/frame filters

P25 HONEYWELL F25 REPLACEMENT CARTRIDGES
• Equal to or better than original equipment performance
• Delivers up to 98% efficiency on 5 micron and larger particles
• Reduces dust accumulation
• Unique face board design lowers initial static pressure
• Sizes available = 16″ x 25″ x 5″, 20″ x 25″ x 5″, and 20″ x 20″ x 5″

P5 PUROLATOR 2000 REPLACEMENT FILTER
• Replacement filter for Trion Air Bear®
• Reduces dust accumulation, allergy causing irritants
• Expanded Metal Support Grid
• Moisture resistant beverage board frame
• Size available = 20″ x 25″ x 5″

P1200 PUROLATOR REPLACEMENT FILTER
• Replacement filter for Trion Air Bear 1200TM®
• Effectively reduces pollen, dust, and mold spores
• Lofted, non-woven cotton/synthetic media
• Increases filtration efficiency
• Size available = 16″ x 25″ x 3